Frame In Drive Housing

(a) Match the protrusion of the drive lever with field frame

6. INSTALL BEARING COVER

(a) Install the rubber, spring and lock plate.

(b) Using a thickness gauge, measure the armature thrust clearance between the lock plate and end frame.

(c) Install the bearing cover with the two screws.

7. INSTALL MAGNETIC SWITCH

Hook the magnetic switch stud underneath the drive lever spring. Install the two nuts.

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment