Fuel System

1. When disconnecting the high fuel pressure line, a large amount of gasoline will spill out, so observe the following procedure:

(a) Put a a container under the connection.

(b) Slowly loosen the connection.

(c) Disconnect the connection.

(d) Plug the connection with a rubber plug.

2. When connecting the flare nut or union bolt on the high pressure pipe union, observe the following procedure: (Union Bolt Type)

(a) Always use a new gasket.

(b) Tighten the union bolt by hand.

(c) Tighten the union bolt to the specified torque. Torque: 300 kg-cm (22 ft-lb, 29 Nm)

(Flare Nut Type)

(a) Apply a light coat of engine oil the flare and tighten the flare nut by hand.

(b) Using SST, tighten the flare nut to specified torque.

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment