Install Camshafts

(a) Place the camshafts in position on the cylinder head as shown in the figure. NOTE: The exhaust camshaft has a distributor drive gear.

(b) Apply seal packing to the cylinder head as shown in the figure.

Seal packing: Part No.08826-00080 or equivalent

(c) Install the bearing caps in their proper locations.

(d) Apply a light coat of engine oil on the threads and under the heads of the bearing cap bolts.

(e) Install and uniformly tighten the bearing cap bolts in several passes, in the sequence shown.

(f) Apply MP grease to a new oil seal lip.

(g) Using SST, tap in the oil seal. SST 09223-50010

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment