Onvehicle Inspection

1. TURN IGNITION SWITCH "ON"

Check that the fan stops.

If it does not. check the cooling fan relay and compartment temperature sensor, and check for a separated connector or severed wire between the cooling fan relay and compartment temperature sensor.

2. DISCONNECT COMPARTMENT TEMPERATURE SENSOR CONNECTOR

Check that fan rotates.

If not. check the cooling fan relay, fan motor, engine main relay and fuse, and check for a short circuit between the cooling fan relay and compartment temperature sensor

3. CONNECT COMPARTMENT TEMPERATURE SENSOR CONNECTOR

High Temperature (Above 80°C (176°F)) START ENGINE

(a) Raise the compartment temperature to above 80°C (176°F).

(b) Check that the fan rotates.

If not, replace the compartment temperature sensor.

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment