Precautions

1. Do not leave the ignition switch on for more than 10 minutes if the engine will not start.

2. With a tachometer is connected to the system, connect the test probe of the tachometer to terminal IG9 of the check connector.

LOCATION: See page FI-89

With a tachometer is connected to the system, connect the test probe of the tachometer to negative (9) terminal of the ignition coil.

3. As some tachometer are not compatible with this ignition system, we recommend that you confirm the compatibility of your unit before using.

4. NEVER allow the tachometer terminal to touch ground as this could damage the igniter and/or ignition coil.

5. Do not disconnect the battery when the engine is running.

6. Check that the igniter Is properly grounded to the body.

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment