Removal Of Cold Start Injector

1. DISCONNECT CABLE FROM NEGATIVE TERMINAL OF BATTERY

2. DISCONNECT COLD START INJECTOR CONNECTOR

3. REMOVE COLD START INJECTOR PIPE

(a) Put a suitable container or shop towel under the injector pipe.

(b) Remove the two union bolts, four gaskets and injector pipe.

NOTE: Slowly loosen the union bolts.

4. REMOVE COLD START INJECTOR

Remove the two bolts, injector and gasket.

To Ignition Switch ST1 (AE and AT) To Starter Relay (AW)

Cold Start Start Injector Injector Time Switch

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment