Inspection Procedure

INSPECT CLOCK ASSEMBLY

Wire Harness View:

m-ifi

/

(a) Disconnect the clock assembly connector E5.

(b) Measure the resistance according to the value(s) in the table below.

Standard resistance

Tester connection

Condition

Specified condition

E - Body ground

Always

Below 1 Q

(c) Measure the voltage according to the value(s) in the table below. Standard voltage

REPAIR OR REPLACE HARNESS OR CONNECTOR

Tester connection

Condition

Specified condition

B - E

Always

10 to 14 V

ACC - E

Ignition switch on (ACC)

10 to 14 V

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE

NAVIGATION ECU COMPONENTS

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment