B Install the steering knuckle LH with the front axle hub subassembly LH to the shock absorber assembly front LH with the bolts and nuts Torque Nm kgfcm ftlbf NOTICE

• Only when reusing the bolts and nuts, apply a small amount of engine oil to the threads of the nuts.

• Be careful not to damage the drive shaft boot and speed sensor rotor.

2. INSTALL FRONT SUSPENSION ARM SUBASSEMBLY LOWER NO.1 LH (See page DS-14)

3. INSTALL TIE ROD END SUB-ASSEMBLY LH (See page DS-14)

4. INSTALL FRONT DISC

5. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY LH

(a) Install the front disc brake caliper assembly LH to the steering knuckle LH with the 2 bolts. Torque: 107 N*m (1.090 kgf*cm, 79 ft.*lbf) NOTICE:

Do not twist the brake hose when installing the front disc brake caliper assembly LH.

6. INSTALL FRONT AXLE HUB LH NUT

(a) Using a socket wrench (30 mm), install a new axle hub LH nut.

HINT:

Stake the nut after inspecting for looseness and runout through the following steps.

7. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY LH

(a) Remove the 2 bolts and separate the front disc brake caliper assembly LH from the steering knuckle LH. NOTICE:

Use a wire or an equivalent to keep the brake caliper from hanging down by the flexible hose.

8. REMOVE FRONT DISC

9. INSPECT FRONT AXLE HUB BEARING LOOSENESS (See page AH-6)

10. INSPECT FRONT AXLE HUB RUNOUT (See page AH-6)

11. INSTALL FRONT DISC

12. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY LH

(a) Install the front disc brake caliper assembly LH with the 2 bolts to the steering knuckle LH. Torque: 107 N*m (1.090 kgf*cm, 79 ft.*lbf) NOTICE:

Do not twist the brake hose when installing the front disc brake caliper assembly LH.

13. INSTALL SPEED SENSOR FRONT LH (See page DS-14)

14. INSTALL FRONT AXLE HUB LH NUT

(a) Using a chisel and hammer, stake the axle hub LH nut.

15. INSTALL FRONT WHEEL

16. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

(a) Inspect and adjust front wheel alignment (See page SP-4).

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment