Data List Active Test

1. DATA LIST

HINT:

With the intelligent tester connected to the DLC3 and the ignition switch on (IG), the ABS, TRAC and VSC data list can be displayed. Follow the prompts on the intelligent tester screen to access the DATA LIST.

Item

Measurement Item / Range (Display)

Normal Condition

Diagnostic Note

ABS MOT RELAY

ABS motor relay / ON or OFF

ON: Motor relay ON OFF: Motor relay OFF

-

SOL RELAY

Solenoid relay / ON or OFF

ON: Solenoid relay ON OFF: Solenoid relay OFF

-

IDLE SW

Main idle switch / ON or OFF

ON: Accelerator pedal released OFF: Accelerator pedal depressed

-

STOP LIGHT SW

Stop light switch / ON or OFF

ON: Brake pedal depressed OFF: Brake pedal released

-

PKB SW

Parking brake switch / ON or OFF

ON: Parking brake applied OFF: Parking brake released

-

ABS OPERT FR

ABS operation (FR) / BEFORE or OPERATE

BEFORE: No ABS operation (FR) OPERATE: During ABS operation (FR)

-

ABS OPERT FL

ABS operation (FL) / BEFORE or OPERATE

BEFORE: No ABS operation (FL) OPERATE: During ABS operation (FL)

-

ABS OPERT RR

ABS operation (RR) / BEFORE or OPERATE

BEFORE: No ABS operation (RR)

OPERATE: During ABS operation

(RR)

-

ABS OPERT RL

ABS operation (RL) / BEFORE or OPERATE

BEFORE: No ABS operation (RL) OPERATE: During ABS operation (RL)

-

WHEEL SPD FR

Wheel speed sensor (FR) reading / min.: 0 mph (0 km/h), max.: 202 mph (326 km/h)

Actual wheel speed

Similar speed as indicated on speedometer

WHEEL SPD FL

Wheel speed sensor (FL) reading / min.: 0 mph (0 km/h), max.: 202 mph (326 km/h)

Actual wheel speed

Similar speed as indicated on speedometer

WHEEL SPD RR

Wheel speed sensor (RR) reading / min.: 0 mph (0 km/h), max.: 202 mph (326 km/h)

Actual wheel speed

Similar speed as indicated on speedometer

WHEEL SPD RL

Wheel speed sensor (RL) reading / min.: 0 mph (0 km/h), max.: 202 mph (326 km/h)

Actual wheel speed

Similar speed as indicated on speedometer

DECELERATSEN

Acceleration sensor 1 reading / min.: -1.869 G, max.: 1.869 G

Approximately 0 +- 0.13 G while stationary

Reading changes when vehicle is bounced

DECELERATSEN2

Acceleration sensor 2 reading / min.: -1.869 G, max.: 1.869 G

Approximately 0 +- 0.13 G while stationary

Reading changes when vehicle is bounced

IG VOLTAGE

ECU power supply voltage / TOO LOW / NORMAL / TOO HIGH

TOO HIGH: 14.0 V or more NORMAL: 9.5 V to 14.0 V TOO LOW: 9.5 V or less

-

SFRR

ABS solenoid (SFRR) / ON or OFF

ON: Operates OFF: Does not operate

-

SFRH

ABS solenoid (SFRH) / ON or OFF

ON: Operates OFF: Does not operate

-

SFLR

ABS solenoid (SFLR) / ON or OFF

ON: Operates OFF: Does not operate

-

Item

Measurement Item / Range (Display)

Normal Condition

Diagnostic Note

SFLH

ABS solenoid (SFLH) / ON or OFF

ON: Operates OFF: Does not operate

-

SRRR (SRR)

ABS solenoid (SRRR (SRR)) / ON or OFF

ON: Operates OFF: Does not operate

-

SRRH (SRH)

ABS solenoid (SRRH (SRH)) / ON or OFF

ON: Operates OFF: Does not operate

-

SRLR

ABS solenoid (SRLR) / ON or OFF

ON: Operates OFF: Does not operate

-

SRLH

ABS solenoid (SRLH) / ON or OFF

ON: Operates OFF: Does not operate

-

SMF (BA-SOL)

TRC solenoid (SMF) / ON or OFF

ON: Operates OFF: Does not operate

-

SMR

TRC solenoid (SMR) / ON or OFF

ON: Operates OFF: Does not operate

-

ENGINE SPD

Engine speed / min.: 0 rpm max.: 6000 rpm

Actual engine speed

-

VEHICLE SPD

Maximum wheel speed sensor reading / min.: 0 mph(0 km/h), max.: 202 mph (326 km/h)

Actual vehicle speed

Speed indicated on speedometer

YAW RATE

Yaw rate sensor/ Min.: -128 deg/ s, Max.: 127 deg/s

Min.: -128 deg/s Max.: 127 deg/s

-

YAW ZERO VALUE

Memorized zero value/ Min.: -128 deg/s, Max.: 127 deg/s

Min.: -128 deg/s Max.: 127 deg/s

-

STEERING ANG

Steering sensor/ Min.: -1152 deg, , Max.: 1150.875 deg

Left turn: Increase Right turn: Decrease

-

MAS CYL PRS1

Master cylinder pressure sensor 1 reading / min.: 0 V, Max.: 5 V

When brake pedal is released : 0.3 to 0.9 V

Reading increases when brake pedal is depressed

ACCELERATOR %

The difference of a present accelerator / min.: 0 %, max.: 128%

-

-

TORQUE

Real output torque / min.: -1024, max.: 1016 N*m

-

-

TEST MODE

Test mode / NORMAL or TEST

NORMAL: Normal mode TEST: During test mode

-

SPD SEN FR

FR speed sensor open detection / OPN DET or NORMAL

OPN DET: Momentary interruption NORMAL: Normal

-

SPD SEN FL

FL speed sensor open detection / OPN DET or NORMAL

OPN DET: Momentary interruption NORMAL: Normal

-

SPD SEN RR

RR speed sensor open detection / OPN DET or NORMAL

OPN DET: Momentary interruption NORMAL: Normal

-

SPD SEN RL

RL speed sensor open detection / OPN DET or NORMAL

OPN DET: Momentary interruption NORMAL: Normal

-

EFI COM

EFI communication open detection / OPN DET or NORMAL

OPN DET: Momentary interruption NORMAL: Normal

-

YAWRATE SEN

Yaw rate sensor open detection / OPN DETor NORMAL

OPN DET: Momentary interruption NORMAL: Normal

-

DESELE SEN

G sensor open detection / OPN DET or NORMAL

OPN DET: Momentary interruption NORMAL: Normal

-

STEERING SEN

Steering sensor open detection / OPN DETor NORMAL

OPN DET: Momentary interruption NORMAL: Normal

-

Item

Measurement Item / Range (Display)

Normal Condition

Diagnostic Note

M/C SEN1

Master cylinder pressure sensor 1 open detection / OPN DET or NORMAL

OPN DET: Momentary interruption NORMAL: Normal

-

INSPECTION MODE

Inspection mode condition / INSPECT or OTHER

INSPECT: During inspect OTHER: No inspect mode

-

#IG ON2

Number of IG ON (Inspection mode) / min.: 0, max.:255

0 to 255

HINT:

Performing the ACTIVE TEST using the intelligent tester allows the relay, actuator, etc. to operate without removing any parts. Performing the ACTIVE TEST as the first step of troubleshooting is one of the methods to shorten labor time.

It is possible to display the DATA LIST during the ACTIVE TEST.

(a) Connect the intelligent tester to the DLC3.

(b) Turn the ignition switch on (IG).

(c) According to the display on the tester, perform the "ACTIVE TEST".

HINT:

The ignition switch must be turned on (IG) to proceed to the ACTIVE TEST using the intelligent tester.

Item

Vehicle Condition / Test Details

Diagnostic Note

SFRR

Turns ABS solenoid (SFRR) ON / OFF

Operating sound of solenoid (clicking sound) is heard

SFRH

Turns ABS solenoid (SFRH) ON / OFF

Operating sound of solenoid (clicking sound) is heard

SFLR

Turns ABS solenoid (SFLR) ON / OFF

Operating sound of solenoid (clicking sound) is heard

SFLH

Turns ABS solenoid (SFLH) ON / OFF

Operating sound of solenoid (clicking sound) is heard

SRRR

Turns ABS solenoid (SRRR) ON / OFF

Operating sound of solenoid (clicking sound) is heard

SRRH

Turns ABS solenoid (SRRH) ON / OFF

Operating sound of solenoid (clicking sound) is heard

SRLR

Turns ABS solenoid (SRLR) ON / OFF

Operating sound of solenoid (clicking sound) is heard

SRLH

Turns ABS solenoid (SRLH) ON / OFF

Operating sound of solenoid (clicking sound) is heard

SMF (BA-SOL)

Turns TRC solenoid (SRLH) ON / OFF

Operating sound of solenoid (clicking sound) is heard

SMR

Turns TRC solenoid SMR ON / OFF

Operating sound of solenoid (clicking sound) is heard

SFRR& SFRH

Turns ABS solenoid SFRR & SFRH ON / OFF

Operating sound of solenoid (clicking sound) is heard

SFLR&SFLH

Turns ABS solenoid SFLR & SFLH ON / OFF

Operating sound of solenoid (clicking sound) is heard

SRH & SRR

Turns ABS solenoid SRRR & SRRH ON / OFF

Operating sound of solenoid (clicking sound) is heard

SRLR & SRLH

Turns ABS solenoid SRLR & SRLH ON / OFF

Operating sound of solenoid (clicking sound) is heard

SFRH & SFLH

Turns ABS solenoid SFRH & SFLH ON / OFF

Operating sound of solenoid (clicking sound) is heard

Item

Vehicle Condition / Test Details

Diagnostic Note

SOL RELAY

Turns ABS solenoid relay ON / OFF

Operating sound of relay (clicking sound) is heard

ABS MOT RELAY

Turns ABS motor relay ON / OFF

Operating sound of relay (clicking sound) is heard

ABS WARN LIGHT

Turns ABS warning light ON / OFF

Observe combination meter

VSC WARN LIGHT

Turns VSC warning light ON / OFF

Observe combination meter

SLIP INDI LIGHT

Turns SLIP indicator light ON / OFF

Observe combination meter

BRAKE WARN LIGHT

Turns BRAKE warning light ON / OFF

Observe combination meter

VSC/BR WARN BUZ

Turns VSC / BRAKE warning buzzer ON / OFF

Buzzer is heard

STOP LIGHT RELAY

Turns stop light ON / OFF

Stop light comes on

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment