Description

This sensor detects the rotation speed of the counter gear. By comparing the counter gear speed signal (NC) with the direct clutch speed sensor signal (NT), the ECM detects the shift timing of the gears and appropriately controls the engine torque and hydraulic pressure according to various conditions. Thus smooth gear shifting is performed.

DTC No.

DTC Detection Condition

Trouble Area

P0793

ECM detects conditions (a), (b) and (c) continuously for 5 sec. or more: (1-trip detection logic)

(b) Park/neutral position switch (STAR) is OFF

(c) Speed sensor (NC): less than 300 rpm

• Open or short in transmission revolution sensor NC (speed sensor NC) circuit

• Transmission revolution sensor NC (speed sensor NC)

• ECM

Reference (Using an oscilloscope):

Check the waveform between terminals NC+ and NC- of the ECM connector.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment