Disassembly

1. REMOVE FRONT WHEEL BEARING DUST DEFLECTOR NO.1 LH

(a) Using a screwdriver, remove the front wheel bearing dust deflector No.1 LH.

2. REMOVE FRONT AXLE HUB LH HOLE SNAP RING

(a) Using snap ring pliers, remove the front axle hub LH hole snap ring.

3. REMOVE FRONT AXLE HUB SUB-ASSEMBLY LH

(a) Using SST, remove the front axle hub sub-assembly LH.

SST 09520-00031

Toyota Sst 09520 00031

(b) Using SST and a press, remove the bearing inner race (outside) from the front axle hub sub-assembly LH.

SST 09950-00020, 09950-60010 (09951-00430), 09950-70010 (09951-07100)

4. REMOVE DISC BRAKE DUST COVER FRONT LH

(a) Using a torx wrench (T30), remove the 4 bolts and disc brake dust cover front LH.

5. REMOVE LOWER BALL JOINT ASSEMBLY FRONT LH (See page SP-24)

6. REMOVE FRONT AXLE HUB LH BEARING

(a) Place the bearing inner race (outside) on the front axle hub LH bearing.

(b) Using SST and a press, press the front axle hub LH bearing until it comes into contact with the SST. SST 09527-17011, 09950-60010 (09951-00600), 09950-70010 (09951-07100)

(c) Using a wrench to make the steering knuckle LH horizontal, fix it to the V block, as shown in the illustration.

NOTICE:

Be sure steering knuckle is horizontally positioned.

(d) Using SST and a press, remove the front axle hub LH bearing.

SST 09950-60010 (09951-00600), 09950-70010 (09951-07100)

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment