Ii

ECHn

PRESET SWITCH "3" Detailed Information Mode 2:

(DTCs are detected in the responses to both "System Check Result Request" and "Diagnostic Memory Request".)

Detailed information of the first code is displayed

Detailed information of the second code is displayed

Detailed information of the second code is displayed

*1: SEEK TRACK DOWN *2: SEEK TRACK UP *3: P...Indicates physical address 190...Physical address

*4: "SyS" indicates the display start of the response to "System Check Result Request".

PRESET SWITCH "2"

Continue to display (*12) (*1)f j(*2)

(*7)

Ou dE

(*1),

k J(*2)

(*8)

pi n 1 Ci__u 1

(*1)i

' |(*2)

c'ci-UC

(*1)i

Continue to display (*13)

PRESET SWITCH "5" (Press 2 seconds or more)

L...Indicates logical address 62...Logical address

*7: "COdE" indicates the display start of the response to "Diagnostic Memory Request".

*9: Physical address appears as the sub-code.

*10: Connection check number

*11: The number of times of occurrence

*12: Continue to display when more than one DTC is detected in the response to "System Check Result Request".

*13: Continue to display when more than one DTC is detected in the response to "Diagnostic Memory Request".

E110918E07

c

1

—,,

u

4. DTC CLEAR/RECHECK

(a) Clearing all DTC Memory (when clearing all the memory of the DTCs previously detected).

(1) When the preset switch "5" is pressed for 2 seconds or more during "Service Check Mode", the DTCs for all components are cleared. ("CLr" is displayed at this time.) HINT:

• A beep sound is emitted once when the DTC memory is completely cleared.

• When the DTC memory for all the components is cleared, only the component codes (physical address) are displayed.

• After the DTC memory is cleared, the "Service Check Mode" is restored.

(b) Clearing Individual DTC Memory (when clearing the memory of the DTC previously detected individually).

(1) When the preset switch "5" is pressed for 2 seconds or more during "Detailed Information Mode 1" or "Detailed Information Mode 2", the DTCs for the target component are cleared. HINT:

• A beep sound is emitted once when the DTC memory is completely cleared.

• When the DTC memory is cleared, only the component code (physical address) is displayed for target component.

• After the DTC memory is cleared, the "Service Check Mode" is restored.

• To check DTCs, press the preset switch "1" and perform the system check again.

(c) Press the preset switch "1" to perform the service check again, and check that no DTCs are displayed for all the component codes (physical address).

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment