In the table below the values listed under Normal Condition are reference values Do not depend solely on these reference values when deciding whether a part is faulty or not Read Data List

(a) Turn the ignition switch off.

(b) Connect the intelligent tester together with the CAN VIM (controller area network vehicle interface module) to the DLC3.

(c) Turn the ignition switch on (IG).

(e) Select the item "DIAGNOSIS / ENHANCED OBD II / DATA LIST".

(f) According to the display on the tester, read the "DATA LIST".

Item

Measurement Item / Range (Display)

Normal Condition

Diagnostic Note

PNP SW [NSW]

PNP SW Status / ON or OFF

Shift lever position is; P and N: ON Except P or N: OFF

When the shift lever position displayed on the intelligent tester differs from the actual position, adjustment of the PNP switch or the shift cable may be incorrect.

REVERSE

PNP SW Status / ON or OFF

Shift lever position is; R: ON

Except R: OFF

t

DRIVE

PNP SW Status / ON or OFF

Shift lever position is; D and S: ON Except D or S: OFF

t

INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

(a) Disconnect the park/neutral position switch connector.

(b) Measure resistance according to the value(s) in the table below when the shift lever is moved to each position. Resistance

Shift Position

Tester Connection

Specified Condition

P

2 - 6 and 4 - 5

Below 1 Q

Except P

10 kQ or higher

R

2 - 1

Below 1 Q

Except R

10 kQ or higher

N

2 - 9 and 4 - 5

Below 1 Q

Except N

10 kQ or higher

D, S, "+" and "-"

2 - 7

Below 1 Q

Except D, S, "+" and "-"

10 kQ or higher

REPLACE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

INSPECT TRANSMISSION FLOOR SHIFT ASSEMBLY

1: w/ Smart Key System 1: w/ Smart Key System

(a) Connect the park/neutral position switch connector.

(b) Disconnect the transmission control switch connector of shift lock control unit assembly.

(c) Measure the resistance according to the value(s) in the

Shift Position

Tester Connection

Specified Condition

S, "+" and "-"

3 - 9 *■■ 3 - 7 *2

Below 1 Q

Except S, "+" and "-"

t

10 kQ or higher

1: w/ Smart Key System 1: w/ Smart Key System

REPLACE TRANSMISSION FLOOR SHIFT ASSEMBLY

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Responses

  • patrizio
    How do you replace a "floor shift assembly" for a 1996 corolla?
    8 years ago

Post a comment