Reassembly

1. INSTALL COOLER EVAPORATOR SUB-ASSEMBLY NO.1

(a) sufficiently apply compressor oil (ND-OIL 8) to 2 new O-rings and the fitting surface. Install the 2 O-rings to the cooler evaporator No.1. Compressor oil : ND-OIL 8 or equivalent

2. INSTALL COOLER EXPANSION VALVE

(a) Using a hexagon wrench 4 mm, install the cooler expansion valve with the 2 hexagon bolts. Torque: 3.5 N*m (35 kgf*cm, 30 in.*lbf)

Sensor

nnnnnnnnnnnnnnnnnnnfl 34.3 mm 5C mm

C129887E01

3. INSTALL EVAPORATOR TEMPERATURE SENSOR

(a) If using a mew evaporator:

Install the sensor to the evaporator as shown in the illustration.

Tube

Case

Tube

Case

C129888E01

C129888E01

(b) If reusing the evaporator:

(1) Install the sensor to the evaporator as shown in the illustration. HINT:

Completely cover the tube with the grommet.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment