Toyota Avalon Axle Nut Removal

HINT:

• Use the same procedures for the RH side and LH side.

• The procedures listed below are for the LH side.

1. REMOVE FRONT WHEEL

2. REMOVE FRONT AXLE HUB LH NUT (See page DS-5)

3. SEPARATE SPEED SENSOR FRONT LH (See page DS-5)

4. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY LH

(a) Remove the 2 bolts and separate the front disc brake caliper assembly LH from the steering knuckle LH. NOTICE:

Use a wire or an equivalent to keep the brake caliper from hanging down by the flexible hose.

5. REMOVE FRONT DISC

6. SEPARATE TIE ROD END SUB-ASSEMBLY LH (See page DS-6)

7. SEPARATE FRONT SUSPENSION ARM SUBASSEMBLY NO.1 LH (See page DS-6)

8. REMOVE FRONT AXLE ASSEMBLY LH

(a) Put matchmarks on the front drive shaft assembly LH and the front axle hub sub-assembly LH.

(b) Using a plastic hammer, separate the front drive shaft assembly LH from the front axle hub subassembly LH.

NOTICE:

Be careful not to damage the drive shaft boot and speed sensor rotor.

(c) Remove the 2 bolts, nuts and steering knuckle LH with the front axle hub sub-assembly LH.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment