Remove Floor Carpet Bracket Rh

(a) Release the 3 clamps.

(b) Turn back the floor carpet.

(d) Remove the floor carpet bracket RH.

18. REMOVE AIR DUCT REAR NO.2

(a) Release the 2 claws and remove the air duct rear No.2.

19. REMOVE AIR DUCT REAR NO.1

(a) Release the 2 claws and remove the air duct rear No.1.

20. REMOVE AIR DUCT SUB-ASSEMBLY NO.1 (See page SR-37)

21. SEPARATE STEERING INTERMEDIATE SHAFT ASSEMBLY (See page SR-37)

22. REMOVE STEERING COLUMN ASSEMBLY (See page SR-37)

23. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY

(a) Disconnect each connector and remove each clamp. Disconnect the wire harness.

(b) Remove the 6 nuts and 3 bolts.

(c) Remove the 3 bolts and nut.

(d) Using a "Torx" socket wrench (T40), remove the 5 "Torx" bolts.

HINT:

The "Torx" bolts on the passenger side can be removed with the collar or for adjustment.

(e) Using a hexagon wrench 12 mm, remove the 2 collars and instrument panel reinforcement assembly with the air conditioner unit assembly.

C129724E01

IE

flr-^

p

C129725E02

(f) Remove the 3 bolts, 2 screws and instrument panel reinforcement assembly.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment