When tightening the nut confirm that the control cable is properly stretched

(e) Start the engine and make sure that the vehicle moves forward when shifting the lever from the N to D position and moves rearward when shifting it to the R position.

REASSEMBLY

1. INSTALL TRANSMISSION CONTROL SWITCH

(a) Install the transmission control switch to the shift lever guide housing. HINT:

Securely engage the claws.

2. INSTALL SHIFT LOCK SOLENOID

(a) Apply MP grease to the hatched area of the shift lever guide housing as indicated in the illustration.

(b) Install the shift lock solenoid with the screw.

(c) Install the shift lever guide housing with the lock pin and a new shift lever nut. NOTICE:

• Install the shift lever nut and lock pin after engaging the 2 claws.

• Securely engage the claws.

3. INSTALL SHIFT LOCK CONTROL ECU SUBASSEMBLY

(a) Install the shift lock control ECU sub-assembly.

(b) Connect the connector to the shift lock control ECU sub-assembly.

^''Position Indicator

C Slide Cover

Position Indicatory

i 1 ^^ 3 1 1

\ 1 1

j—1

c

C130741E03

INSTALL SHIFT LOCK RELEASE BUTTON

(a) Apply MP grease to the shift lock release button and spring in the illustration.

(b) Install the shift lock release button and spring to the floor shift assembly.

HINT:

Securely engage the claws.

(b) Install the position indicator slide cover to the shift lever guide housing.

(c) Install the position indicator housing upper to the shift lever guide housing. HINT:

Securely engage the claws.

5. INSTALL POSITION INDICATOR SLIDE COVER

(a) Install position indicator slide cover No. 2 to the position indicator slide cover.

1—I

4

3

2

1

[g.

7,

6

5]

6. INSTALL INDICATOR LIGHT WIRE

(a) Securely connect the 2 terminals of the indicator light wire harness to the transmission control switch connector.

(b) Install the position indicator light bulb to the indicator light wire.

(c) Install the position indicator bulb cap to the position indicator light bulb.

(d) Install the transmission control switch connector.

(e) Install the indicator light wire to the position indicator housing upper. NOTICE:

Make sure that the indicator light wire is securely installed to the position indicator housing upper.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment