Knock Sensor Azfe Replacement

1. DRAIN ENGINE COOLANT (See page 16-6)

2. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE

3. REMOVE THROTTLE BODY ASSY (See page 10-6)

Knock Sensor New Corolla 2000

4. REMOVE INTAKE MANIFOLD

(a) Remove the 5 bolts, 2 nuts, intake manifold and gasket.

5. REMOVE KNOCK SENSOR

(a) Disconnect the knock sensor connector.

(b) Remove the nut and knock sensor.

6. INSTALL KNOCK SENSOR

(a) Install the knock sensor with the nut. Torque: 20 N m (204 kgf cm, 15 ft Ibf)

(b) Connect the knock sensor connector.

A85381

2006 Toyota Camry Intake Leak

7. INSTALL INTAKE MANIFOLD

(a) Install a new gasket and the intake manifold with the 5 bolts and 2 nuts.

Avalon 2002 Knock Sensor

A85381

2az Engine Harness

A85381

8. INSTALL THROTTLE BODY ASSY (See page 10-6)

9. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE

10. CHECK CONNECTION OF VACUUM HOSE

11. ADD ENGINE COOLANT (See page 16-6)

12. CHECK FOR ENGINE COOLANT LEAKS (See page 16-1)

ECM (2AZ-FE) REPLACEMENT

1. DISCONNECT BATTERY NEGATIVE TERMINAL

2. REMOVE FRONT DOOR SCUFF PLATE RH (See page 76-22)

3. REMOVE COWL SIDE TRIM SUB-ASSY RH (See page 76-22)

4. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSY NO.1 (See page 71-16)

5. REMOVE INSTRUMENT PANEL SUB-ASSY LOWER (See page 71-16)

Sensores Camry 2002

REMOVE ECM

Remove the 2 wire harness clamps. Disconnect the 5 ECM connectors. Remove the 2 nuts and ECM.

REMOVE ECM BRACKET

Remove the 2 screws and ECM bracket.

——x^]

p

A91034

8. REMOVE ECM BRACKET NO.2

(a) Remove the 2 screws and ECM bracket.

——x^]

P

A91034

9. INSTALL ECM BRACKET NO.2

(a) Install the ECM bracket with the 2 screws.

Darcy Law Diagram

10. INSTALL ECM BRACKET

(a) Install the ECM bracket with the 2 screws.

11. INSTALL ECM

(a) Install the 2 wire harness clamps.

(b) Connect the 5 ECM connectors.

(c) Install the ECM with the 2 nuts. Torque: 5.5 N m (56 kgf cm, 49 in. Ibf)

12. INSTALL INSTRUMENT PANEL SUB-ASSY LOWER (See page 71-16)

13. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSY NO.1 (See page 71-16)

14. INSTALL COWL SIDE TRIM SUB-ASSY RH (See page 76-22)

15. INSTALL FRONT DOOR SCUFF PLATE RH (See page 76-22)

16. CONNECT BATTERY NEGATIVE TERMINAL

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Responses

  • luwam
    How to replace a nox sensor on a 2000 toyota camry?
    8 years ago
  • dirk
    How to remove intake manifold ON 2002 AWD?
    7 years ago
  • jane
    Where is the knock sensor connector located on a 2002 toyota camry?
    7 years ago

Post a comment