Notice For Using Post Lift

(a) Follow the safety procedures outlined in its instruction manual.

(b) Use precautionary measures to prevent the free wheel beam from damaging tires or wheels.

(c) Use wheel chocks to secure the vehicle.

3. NOTICE FOR USING JACK AND SAFETY STAND (a) Work in a flat area using wheel chocks at all times.

Use a safety stand with a rubber attachment, as shown in the illustration.

Apply the jack and rigid rack to the specified location on the vehicle.

When jacking up the front wheels, release the parking brake and place wheel chocks only behind the rear wheels. When jacking up the rear wheels, place wheel chocks only in front of the front wheels. The jack should not be used without the rigid rack.

(f) When jacking up only the front wheels or only the rear wheels, place wheel chocks on both sides of the wheels touching the ground.

(g) When lowering the vehicle with its front wheels jacked up, release the parking brake and place wheel chocks only in front of the rear wheels. When lowering a vehicle with its rear wheels jacked up, place wheel chocks only behind the front wheels.

Rubber Attachment

Rubber Attachment

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment