A Install the gasket to the cylinder head cover NOTICE

Remove any oil from the contact surface.

53. INSTALL CYLINDER HEAD COVER SUB-ASSEMBLY (See page EM-33)

54. INSTALL OIL FILTER UNION (w/o Oil Cooler)

(a) Using a 12 mm hexagon wrench, install the oil filter union.

55. INSTALL OIL COOLER ASSEMBLY (w/ Oil Cooler)

(a) Clean the oil cooler contact surface on the cooler mounting.

(b) Install a new O-ring to the oil cooler.

(c) Apply a light coat of engine oil to the threads and under the head of the union bolt.

(d) Install the oil cooler with the plate washer, oil filter union and nut.

Torque: Oil Filter Union

(e) Apply adhesive to the threads of the oil filter union. Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or Equivalent

(f) Install the union bolt.

56. INSTALL OIL FILTER SUB-ASSEMBLY

(a) Check and clean the oil filter installation surface.

(b) Apply clean engine oil to the gasket of a new oil filter.

(c) Lightly screw the oil filter into place, and tighten it until the gasket contacts the seat.

(d) When using a torque wrench:

(1) Using SST, tighten the oil filter. SST 09228-06501

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment