Em

Torque: Bolt A

5. INSTALL NO. 1 STRAIGHT SCREW PLUG

(a) Using a 14 mm straight hexagon wrench, install 2 new gaskets and the 2 straight screw plugs.

6. INSTALL VALVE SPRING SEAT

(a) Install the valve spring seats to the cylinder head.

7. INSTALL VALVE STEM OIL SEAL

(a) Apply a light coat of engine oil to a new oil seal. NOTICE:

Pay close attention when installing the intake and exhaust oil seals. For example, installing the intake oil seal into the exhaust side or installing the exhaust oil seal to the intake side can cause installation problems later. HINT:

The intake valve oil seal is gray and the exhaust valve oil seal is black.

(b) Using SST, push in the oil seal. SST 09201-41020 NOTICE:

Failure to use SST will cause the seal to be damaged or improperly seated.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment