(b) Turn the ignition switch to the ON position and turn the tester on.
(d) Drive the vehicle in accordance with the drive pattern described in the CONFIRMATION DRIVING PATTERN.
(e) Select the following menu items: DIAGNOSIS / ENHANCED OBD II / MONITOR INFO / MONITOR STATUS.
(f) Check that the status of O2S MON is COMPL.
If the status is still INCMPL, drive the vehicle according to the driving pattern again.
• AVAIL indicates that the component has not been monitored yet.
• COMPL indicates that the component is functioning normally.
• INCMPL indicates that the component is malfunctioning.
(g) Select the following menu items: DIAGNOSIS / ENHANCED OBD II / MONITOR INFO / TEST RESULT / RANGE B1 S1; then press the ENTER button.
(h) Check the test value of the A/F sensor output current during fuel-cut.
Was this article helpful?