Inspection

1. INSPECT OIL JET

(a) Check the oil jet for damage or clogging. If necessary, repair the cylinder block.

___

p

A114340

2. INSPECT OIL PUMP RELIEF VALVE

(a) Check the relief valve.

(1) Coat the valve with engine oil, and then check that the valve falls smoothly into the valve hole under its own weight.

If the valve does not fall smoothly, replace the relief valve. If necessary, replace the oil pump assembly.

3. INSPECT OIL PUMP ROTOR

(a) Install the oil pump rotor.

(1) Coat the drive rotor and driven rotor with engine oil.

(2) Place the drive and driven rotors into the oil pump with the marks facing the pump cover side.

(b) Check the side clearance.

(1) Using a feeler gauge and precision straightedge, measure the clearance between the rotors and precision straightedge. Standard clearance:

0.030 to 0.085 mm (0.0012 to 0.0033 in.) Maximum clearance: 0.16 mm (0.0063 in.) If the side clearance is greater than the maximum, replace the oil pump assembly.

Relief Valve

Plug

Valve Spring

Relief Valve

Plug

Valve Spring

Check the tip clearance.

(1) Using a feeler gauge, measure the clearance between the drive and driven rotor tips. Standard clearance:

0.080 to 0.160 mm (0.0031 to 0.0063 in.) Maximum clearance: 0.35 mm (0.0138 in.) If the tip clearance is greater than the maximum, replace the oil pump assembly.

Check the body clearance. (1) Using a feeler gauge, measure the clearance between the driven rotor and pump body.

Standard clearance:

0.100 to 0.170 mm (0.0039 to 0.0067 in.) Maximum clearance:

0.325 mm (0.0128 in.) If the body clearance is greater than the maximum, replace the oil pump assembly.

INSPECT NO. 2 CHAIN SUB-ASSEMBLY (See page EM-138)

INSPECT OIL PUMP DRIVE SPROCKET (See page EM-138)

INSPECT OIL PUMP DRIVEN SPROCKET (See page EM-139)

7. INSPECT CHAIN TENSIONER PLATE (See page EM-140)

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment