Inspection Procedure

NOTICE:

• Turn the ignition switch off before measuring the resistance of the CAN main wire and CAN branch wires.

• After the ignition switch is turned off, check that the key reminder warning system and light reminder warning system are not operating.

• Before measuring the resistance, leave the vehicle as is for at least 1 minute and do not operate the ignition switch, any other switches or the doors. If doors need to be opened in order to check connectors, open the doors and leave them open.

HINT:

Operating the ignition switch, any other switches or any triggers related ECU and sensor communication on the CAN, which would cause resistance reading variations.

CHECK CAN BUS LINE FOR DISCONNECTION (COMBINATION METER MAIN BUS WIRE)

Combination Meter Connector (Wire Harness Side View):

CANL

CANL

(a) Turn the ignition switch off.

(b) Disconnect the combination meter connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard resistance

Tester Connection

Condition

Specified Condition

F1-17 (CANH) - F1-18 (CANL)

Ignition switch off

108 to 132 Q

REPAIR OR REPLACE CAN BUS MAIN WIRE OR CONNECTOR (COMBINATION METER MAIN BUS LINE)

CHECK HARNESS AND CONNECTOR (ES, IG+, B2)

Combination Meter Connector (Wire Harness Side View):

îcfdI

lirH-

m

(a) Disconnect the combination meter connector.

(b) Measure the resistance according to the value(s) in the table below.

Standard resistance

Tester Connection

Condition

Specified Condition

F1-24 (ES) - Body ground

Always

Below 1 Q

(c) Measure the voltage according to the value(s) in the table below. Standard voltage

Tester Connection

Condition

Specified Condition

F1-13 (IG+) - Body ground

Ignition switch on (IG)

10 to 14 V

F1-2 (B2) - Body ground

Always

10 to 14 V

REPAIR OR REPLACE HARNESS OR CONNECTOR

REPLACE COMBINATION METER ECU

GA-ee

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment