Install Chain Subassembly See page EM

36. INSTALL CHAIN TENSIONER SLIPPER (See page EM-29)

37. INSTALL TIMING CHAIN GUIDE (See page EM-30)

38. INSTALL NO. 1 CRANKSHAFT POSITION SENSOR PLATE (See page EM-30)

39. INSTALL TIMING CHAIN CASE OIL SEAL

(a) Using SST, tap in a new oil seal until its surface is flush with the timing chain cover edge.

SST 09223-22010

(b) Apply a light coat of MP grease to the lip of the oil seal.

NOTICE:

Keep the gap between the timing chain cover edge and the oil seal free of foreign matter.

40. INSTALL TIMING CHAIN COVER SUB-ASSEMBLY (See page LU-15)

41. INSTALL V-RIBBED BELT TENSIONER ASSEMBLY (See page EM-30)

42. INSTALL OIL PAN SUB-ASSEMBLY (See page EM-31)

43. INSTALL OIL PAN DRAIN PLUG

(a) Install a new gasket and oil pan drain plug with a new gasket.

44. INSTALL WATER PUMP ASSEMBLY (See page CO-10)

45. INSTALL WATER PUMP PULLEY (See page CO-11)

46. INSTALL CRANKSHAFT POSITION SENSOR

(a) Apply a light coat of engine oil to the O-ring of the sensor.

(b) Confirm that the wire harness of the sensor is placed as shown in the illustration.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment