Install Cylinder Head Cover Subassembly

(a) Remove any old packing material from the contact surface.

Nut^

A127550E01

Nut^

A127550E01

(b) Apply seal packing to the 2 locations shown in the illustration.

Seal packing: Toyota Genuine Seal Packing Block, Three Bond 1207B or Equivalent NOTICE:

• Remove any oil from the contact surface.

• Install the cylinder head cover within 3 minutes of applying seal packing.

• Do not add engine oil for at least 2 hours after installing the cylinder head cover.

(c) Install the cylinder head cover with the 8 bolts and 2 nuts.

Torque: Bolt A

(d) Install the 2 engine wires with the 2 bolts. Torque: 8.4 N*m (86 kgf*cm, 74 in.*lbf)

18. INSTALL NO. 2 VENTILATION HOSE

19. INSTALL VENTILATION HOSE

20. INSTALL IGNITION COIL ASSEMBLY

(a) Install the 4 ignition coils with the 4 bolts. Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf)

21. INSTALL VANE PUMP ASSEMBLY (See page EM-113)

22. INSTALL GENERATOR ASSEMBLY (See page CH-19)

23. INSTALL V-RIBBED BELT (See page EM-6)

24. INSTALL NO. 2 ENGINE MOUNTING BRACKET RH (See page EM-118)

25. INSTALL ENGINE MOVING CONTROL ROD SUBASSEMBLY (See page EM-119)

26. INSTALL NO. 2 ENGINE MOUNTING STAY RH (See page EM-119)

27. INSTALL FRONT EXHAUST PIPE ASSEMBLY

HINT:

See page EX-3.

28. ADD ENGINE OIL

29. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (See page EM-120)

30. CHECK FOR ENGINE OIL LEAKS

31. CHECK FOR EXHAUST GAS LEAKS

32. CHECK IGNITION TIMING (See page EM-1)

33. INSTALL FRONT FENDER APRON SEAL RH

34. INSTALL ENGINE UNDER COVER LH

35. INSTALL ENGINE UNDER COVER RH

36. INSTALL FRONT WHEEL RH

37. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (See page EM-121)

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment