Install Fuel Delivery Pipe With Injector

(a) Install 4 new insulators into the cylinder head.

(b) Install the 2 delivery pipe spacers onto the cylinder head.

O-Ring ---

Fuel Injector-4-—vy^l^n

/ / /

Insulator / /x //

Fuel Del

ivery Pipe

p NX \

A097444E02

Ring Delivery Pipe

(c) Install the fuel delivery pipe together with the 4 fuel injectors, then temporarily tighten the 2 bolts. NOTICE:

Be careful not to drop the fuel injectors when installing the fuel delivery pipe.

(d) Check that the fuel injector rotates smoothly.

If the fuel injector does not rotate smoothly, replace the O-ring.

(e) Tighten the 2 bolts to the specified torque. Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf)

(f) Connect the 4 fuel injector connectors.

(g) Install the 2 wire harness clamps.

INSTALL NO. 2 VENTILATION HOSE

(a) Connect the ventilation hose to the ventilation valve. NOTICE:

Make sure that the paint mark and hose clamp are positioned as shown in the illustration after connecting the hose.

CONNECT FUEL TUBE SUB-ASSEMBLY

(a) Install the fuel tube to the fuel hose clamp.

(b) Push the fuel tube connector until it makes a "click" sound.

(c) Install the No. 1 fuel pipe clamp.

5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY (See page ES-419)

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

7. CHECK FOR FUEL LEAKS

HINT:

See page FU-9.

8. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (See page EM-121)

FUEL PRESSURE PULSATION DAMPER COMPONENTS

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment