Install Generator Rotor Assembly

(a) Place the drive end frame on the clutch pulley.

(b) Install the generator rotor onto the generator rectifier end frame.

(c) Place a new generator washer on the generator rotor.

INSTALL GENERATOR COIL ASSEMBLY

(a) Using SST and a press, press in the generator coil assembly to the drive end frame. SST 09612-70100 (09612-07240)

(b) Tighten the 4 bolts.

(c) Install the cord clip with the bolt.

INSTALL GENERATOR BRUSH HOLDER ASSEMBLY

(a) While pushing the 2 brushes into the generator brush holder, insert a 1.0 mm (0.039 in.) pin into the generator brush holder.

(b) Install the generator brush holder with the 2 screws. Torque: 1.8 N*m (18 kgf*cm, 16 in.*lbf)

(c) Pull the pin out of the generator brush holder.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment