Fuel Suction Assembly For 2004 Camry

1. INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE

(a) Install a new gasket to the fuel suction tube.

(b) Install the fuel suction tube. NOTICE:

• Do not damage the fuel pump filter.

• Be careful that the arm of the sender gauge does not bend.

2. INSTALL FUEL TANK VENT TUBE SET PLATE

(a) Align the mark of the set plate with the fuel suction tube.

(b) Install the set plate with the 8 bolts. Torque: 5.9 N*m (60 kgf*cm, 52 in.*lbf)

3. CONNECT FUEL PUMP TUBE SUB-ASSEMBLY

(a) Install the fuel pump tube with the tube joint clip.

NOTICE:

• Check that there are no scratches or foreign objects on the connecting part.

• Check that the fuel tube joint is inserted securely.

• Check that the tube joint clip is on the collar of the fuel tube joint.

• After installing the tube joint clip, check that the fuel tube joint is pulled off.

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

5. CHECK FOR FUEL LEAKS (See page FU-8)

6. INSTALL REAR FLOOR SERVICE HOLE COVER

(a) Connect the fuel pump connector.

(b) Install the rear floor service hole cover with new butyl tape.

7. INSTALL REAR SEAT CUSHION ASSEMBLY (for Fixed Seat Type) (See page SE-84)

8. INSTALL REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type) (See page SE-58)

9. INSTALL REAR SEAT CUSHION ASSEMBLY (for Reclining Seat Type) (See page SE-73)

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment