Installation

INSTALL ECM

(a) Install the bracket to the ECM with the 4 screws. Torque: 3.0 N*m (30 kgf*cm, 27 in.*lbf)

(b) Install the ECM with the 3 bolts.

2. CONNECT CONNECTOR

(a) Connect the 2 ECM connectors. NOTICE:

When connecting the connector, make sure that dirt, water and other foreign matter does not become stuck between the connector and other part.

(1) Connect the 2 ECM connectors and lower the 2 levers.

NOTICE:

Make sure that the 2 levers are securely lowered.

3. INSTALL AIR CLEANER CASE SUB-ASSEMBLY (See page EM-120)

4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY (See page ES-419)

5. INSTALL ENGINE COVER SUB-ASSEMBLY (See page EM-121)

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment