Installation

1. INSTALL TIMING CHAIN CASE OIL SEAL

(a) Apply MP grease to a new oil seal lip. NOTICE:

Keep the lip free from foreign matter.

(b) Using SST and a hammer, tap in the oil seal until its surface is flush with the rear oil seal retainer edge. SST 09223-22010

NOTICE:

Wipe off extra grease from the crankshaft.

2. INSTALL CRANKSHAFT PULLEY

(1) Align the pulley set key with the key groove of the pulley.

(2) Using SST, fix the pulley in place and tighten the bolt.

SST 09960-10010 (09962-01000, 0996301000)

(1) Align the pulley set key with the key groove of the pulley.

(2) Using SST, fix the pulley in place and tighten the bolt.

SST 09213-54015 (91651-60855), 0933000021

3. INSTALL V-RIBBED BELT (See page EM-6)

4. INSTALL ENGINE UNDER COVER LH

5. INSTALL ENGINE UNDER COVER RH

6. INSTALL FRONT FENDER APRON SEAL RH

7. INSTALL FRONT WHEEL RH

8. CHECK FOR ENGINE OIL LEAKS

ENGINE REAR OIL SEAL COMPONENTS

• ENGINE REAR OIL SEAL
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment