Installation

1. INSTALL THERMOSTAT

(a) Install a new gasket onto the thermostat.

(b) Install the thermostat with the jiggle valve upward. HINT:

The jiggle valve may be set to within 10° on either side of the prescribed position.

2. INSTALL WATER INLET

(a) Install the water inlet with the 2 nuts. Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf)

3. CONNECT RADIATOR HOSE OUTLET (See page EM-118)

4. ADD ENGINE COOLANT (See page CO-5)

5. CHECK FOR ENGINE COOLANT LEAKS (See page CO-1)

6. INSTALL ENGINE UNDER COVER LH

7. INSTALL ENGINE UNDER COVER RH

8. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

9. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment