Protrusion height to mm to in

(e) Using a sharp 5.5 mm reamer, ream the guide bush to obtain the standard specified clearance between the guide bush and valve stem. Standard oil clearance: 0.030 to 0.065 mm (0.0012 to 0.0026 in.)

Upper Side:

Upper Side:

A128230E01

3. INSTALL RING W/HEAD PIN

(a) Using a plastic-faced hammer, tap in a new ring pin to the specified protrusion height. Protrusion height: 3 mm (0.12 in.)

4. INSTALL STUD BOLT NOTICE:

If the stud bolt is deformed or the threads are damaged, replace it.

(a) Using E5 and E7 "torx" sockets, install the stud bolts.

Front Side:

Front Side:

Upper Side:

B

Intake Side:

Exhaust Side:

Intake Side:

C

Exhaust Side:

D

M

/

=

A (M6)

iMt

;

/

(

C (M8)

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment