Removal

1. DISCHARGE FUEL SYSTEM PRESSURE

HINT:

See page FU-1.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

4. REMOVE FRONT WHEELS

5. REMOVE ENGINE UNDER COVER LH

6. REMOVE ENGINE UNDER COVER RH

7. REMOVE FRONT FENDER APRON SEAL RH

8. DRAIN ENGINE OIL (See page LU-4)

9. DRAIN ENGINE COOLANT (See page CO-5)

10. DRAIN AUTOMATIC TRANSAXLE FLUID (for Automatic Transaxle) (See page AX-162)

11. DRAIN MANUAL TRANSAXLE OIL (for Manual Transaxle) (See page MX-5)

12. DRAIN BRAKE FLUID (for Manual Transaxle) (See page BR-28)

13. REMOVE WINDSHIELD WIPER LINK ASSEMBLY

HINT:

See page WW-9.

14. REMOVE COWL TOP PANEL OUTER SUBASSEMBLY (See page ES-424)

15. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

(a) Remove the 2 nuts and cover.

16. REMOVE V-RIBBED BELT (See page EM-6)

17. REMOVE AIR CLEANER INLET ASSEMBLY

(a) Remove the 2 bolts, clamp and air cleaner inlet.

18. REMOVE AIR CLEANER CAP SUB-ASSEMBLY (See page ES-416)

19. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

(a) Disconnect the hose clamp.

(b) Remove the 3 bolts and air cleaner case.

20. REMOVE BATTERY

(a) Loosen the bolt and nut, and remove the battery clamp.

(b) Remove the battery and battery tray.

21. REMOVE NO. 2 ENGINE MOUNTING STAY RH

(a) Remove the 2 bolts and No. 2 mounting stay RH.

22. REMOVE ENGINE MOVING CONTROL ROD SUBASSEMBLY

(a) Remove the bolt and disconnect the ground cable.

o\ VfCr^Mfr

A//

c V

^rf w

A134910

my

c

A134907

(b) Remove the 3 bolts and the engine moving control rod with bracket.

REMOVE NO. 2 ENGINE MOUNTING BRACKET RH

(a) Remove the 3 bolts and No. 2 mounting bracket RH.

DISCONNECT NO. 1 VACUUM HOSE CONNECTOR

(a) Remove the clamp and disconnect the vacuum hose connector.

DISCONNECT RADIATOR HOSE INLET

(a) Remove the clamp and disconnect the radiator hose inlet.

26. DISCONNECT RADIATOR HOSE OUTLET

(a) Remove the clamp and disconnect the radiator hose outlet.

27. DISCONNECT OIL COOLER INLET HOSE (for Automatic Transaxle) (See page CO-22)

28. DISCONNECT OIL COOLER OUTLET HOSE (for Automatic Transaxle) (See page CO-23)

DIY Battery Repair

DIY Battery Repair

You can now recondition your old batteries at home and bring them back to 100 percent of their working condition. This guide will enable you to revive All NiCd batteries regardless of brand and battery volt. It will give you the required information on how to re-energize and revive your NiCd batteries through the RVD process, charging method and charging guidelines.

Get My Free Ebook


Post a comment