Removal

1. REMOVE FRONT WHEEL RH

2. REMOVE ENGINE UNDER COVER LH

3. REMOVE ENGINE UNDER COVER RH

4. REMOVE FRONT FENDER APRON SEAL RH

5. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY (See page EM-94)

6. REMOVE IGNITION COIL ASSEMBLY (See page EM-106)

7. REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY (See page EM-21)

8. SET NO. 1 CYLINDER TO TDC/COMPRESSION (See page EM-8)

9. REMOVE NO. 1 CHAIN TENSIONER ASSEMBLY (See page EM-22)

10. REMOVE NO. 2 CAMSHAFT

(a) While holding the camshaft with a wrench, loosen the camshaft timing set bolt.

Using several steps, uniformly loosen and remove the 10 bearing cap bolts in the sequence shown in the illustration. Remove the 5 bearing caps.

While holding the No. 2 camshaft by hand, remove the camshaft timing sprocket set bolt. Remove the camshaft timing sprocket from the No. 2 camshaft with the timing chain wrapped on the sprocket.

Remove the camshaft timing sprocket from the timing chain.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment