Removal

1. REMOVE FRONT WHEEL RH

2. REMOVE FRONT FENDER APRON SEAL RH

3. REMOVE ENGINE UNDER COVER LH

4. REMOVE ENGINE UNDER COVER RH

5. REMOVE V-RIBBED BELT (See page EM-6)

6. REMOVE CRANKSHAFT PULLEY

(1) Using SST, fix the pulley in place and loosen the pulley bolt.

SST 09960-10010 (09962-01000, 0996301000)

(2) Using SST, remove the pulley bolt and pulley. SST 09950-40011 (09951-04010, 0995204010, 09953-04030, 09955-04041, 09957-04010, 09954-04010, 9111151014)

(1) Using SST, fix the pulley in place and loosen the pulley bolt.

SST 09213-54015 (91651-60855), 0933000021

(2) Using SST, remove the pulley bolt and pulley. SST 09950-50013 (09951-05010, 0995205010, 09953-05020, 09954-05021), 09950-40011 (09957-04010)

HINT:

If necessary, remove the pulley and pulley bolt using SST.

Cut Position

A112529E02

7. REMOVE TIMING CHAIN CASE OIL SEAL

(a) Using a knife, cut off the oil seal lip.

(b) Using a screwdriver with the tip taped, pry out the oil seal.

NOTICE:

After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment