Remove Generator Brush Holder Assembly

(a) Place the generator assembly on the clutch pulley.

(b) Remove the 3 nuts and generator rear end cover.

REMOVE GENERATOR TERMINAL INSULATOR

(a) Remove the terminal insulator.

REMOVE GENERATOR BRUSH HOLDER ASSEMBLY

(a) Remove the 2 screws and generator brush holder.

5. REMOVE GENERATOR ROTOR ASSEMBLY

(b) Remove the bolt and cord clip.

(c) Using SST, remove the coil.

SST 09950-40011 (09951-04020, 09952-04010, 09953-04020, 09954-04010, 09955-04071, 09957-04010, 09958-04011)

6. REMOVE GENERATOR ROTOR ASSEMBLY

(a) Remove the washer.

(b) Remove the generator rotor.

7. REMOVE GENERATOR DRIVE END FRAME BEARING

(a) Remove the 4 screws and bearing retainer.

(b) Using SST and a hammer, tap out the bearing. SST 09950-60010 (09951-00250), 09950-70010 (09951-07100)

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment