Sst For Toyota Connector

(4) Turn the SST, align the retainers inside the connector with the SST chamfered parts and insert SST into the connector.

(5) Slide the SST and the connector together towards the fuel tube assembly.

1 \

\ Push

p

B084645E01

"yy Pull

P

B084645E04

(e) Observe the following precautions when connecting the fuel tube connector (metallic type):

(1) Check if there is any damage or foreign objects on the connecting part of the pipe.

(2) Match the axis of the connector with the axis of the pipe, and push into the connector until the connector makes a "click" sound. If the connection is tight, apply a small amount of fresh engine oil to the tip of the pipe.

(3) After finishing the connection, check if the pipe and the connector are securely connected by pulling on them.

(4) Check for fuel leaks.

(5) Install a new No. 2 fuel pipe clamp.

(f) Observe the following precautions when disconnecting the fuel tube connectors (Quick type A):

(1) Remove the No. 1 fuel pipe clamp from the tube connector.

(2) Check that there is no dirt or other foreign objects on the pipe and around the connector before disconnecting them. Clean them if necessary.

(3) Disconnect the connector from the pipe by hand.

(4) When the connector and the pipe are stuck, push in and pull on the connector to release it. Pull the connector out of the pipe carefully.

(5) Check that there is no dirt or other foreign objects on the sealing surface of the disconnected pipe. Clean it away if necessary.

(6) Do not damage the disconnected pipe and connector, and prevent entry of foreign objects by covering them with a plastic bag.

Quick Type A

(g) Observe the following precautions when connecting the fuel tube connectors (Quick Type A):

(1) Check if there is any damage or foreign objects on the connecting parts of the pipes.

(2) Line up the two parts of the pipes to be connected, and push them together until the connector makes a "click" sound. If the pipe is difficult to push into the connector, apply a small amount of clean engine oil to the tip of the pipe and reinsert it.

(3) After connecting the pipes, check that the pipe and connector are securely connected by pulling on them.

(4) Check for fuel leaks.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment