Torque Nm kgfcm ftlbf

(e) Check that the camshaft timing gear can move to the retard angle side (the right direction) and is locked in the most retarded position.

2. INSTALL CAMSHAFT

(a) Apply a light coat of engine oil to the journal portion of the camshaft.

(b) Install the timing chain onto the camshaft timing gear with the paint mark aligned with the timing mark in the camshaft timing gear as shown in the illustration.

(c) Examine the front marks and numbers, and check that the order is as shown in the illustration. Then install the bearing caps into the cylinder head.

(d) Apply a light coat of engine oil to the threads and under the heads of the bearing cap bolts.

(e) Using several steps, uniformly tighten the 10 bearing cap bolts in the sequence shown in the illustration.

Torque: No. 1 Bearing cap

No. 3 Bearing cap

3. INSTALL NO. 2 CAMSHAFT

(a) Apply a light coat of engine oil to the journal portion of the No. 2 camshaft.

(b) Put the No. 2 camshaft on the cylinder head with the paint mark of the chain aligned with the timing mark on the camshaft timing sprocket.

(c) While holding the No. 2 camshaft by hand, temporarily tighten the camshaft timing sprocket set bolt.

(d) Examine the front marks and numbers, and check that the order is as shown in the illustration. Then install the bearing caps onto the cylinder head.

(e) Apply a light coat of engine oil to the threads and under the heads of the bearing cap bolts.

(f) Using several steps, uniformly tighten the 10 bearing cap bolts in the sequence shown in the illustration.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment