Diagnosis Display Detailed Description

HINT:

• This section contains a detailed description of displays within diagnostic mode.

• Illustrations may differ from the actual vehicle depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle.

1. SYSTEM CHECK

(a) System Check Mode Screen

System Check Mode

EMV

r

Old

¡¡CAMERA !

NÄVI

CHEK

¡MONET I

CD-CH1

EXCH

I----T--1 L-

CD-CH2

MD-CH

_

OK I

NCON

JNRES

LAN Mon i| CodeCLR l| Memory CLR\| Recheck

(1) Device Names and Hardware Address/*1 HINT:

• Registered device names are displayed.

• If a device name is unknown to the system, its physical address is shown instead.

Address No.

Name

Address No.

Name

110

EMV

120

AVX

128

1 DIN TV

140

AVN

144

G-BOOK

178

NAVI

17C

MONET

190

AUDIO H/U

1AC

CAMERA-C

1B0

Rr-TV

1C0

Rr-CONT

19D

BT-HF

1C4

PANEL

1C6

G/W

1C8

FM-M-LCD

1D8

CONT-SW

1EC

Body

118

EMVN

1F1

XM

1F2

SIRIUS

230

TV-TUNER

240

CD-CH2

250

DVD-CH

280

CAMERA

360

CD-CH1

3A0

MD-CH

Address No.

Name

Address No.

Name

17D

TEL

440

DSP-AMP

530

ETC

1F6

RSE

1A0

DVD-P

1D6

CLOCK

238

DTV

480

AMP

Result codes for all devices are displayed.

Result

Meaning

Action

OK

The device did not respond with a DTC (excluding communication DTCs from the AVC-LAN).

-

EXCH

The device responds with a "replace"-type DTC.

Look up the DTC in "Unit Check Mode" and replace the device.

CHEK

The device responds with a "check"-type DTC.

Look up the DTC in "Unit Check Mode".

NCON

The device was previously present, but does not respond in diagnostic mode.

1. Check power supply wire harness of the device.

2. Check the AVC-LAN of the device.

Old

The device responds with an "old"-type DTC.

Look up the DTC in "Unit Check Mode".

NRES

The device responds in diagnostic mode, but gives no DTC information.

1. Check power supply wire harness of the device.

2. Check the AVC-LAN of the device.

• Present DTCs are cleared.

• Press the "Code CLR" switch for 3 seconds.

• Present and past DTCs and registered connected device names are cleared.

• Press the "Memory CLR" switch for 3 seconds.

(b) Diagnosis MENU Screen

Diagnosis MENU

Service Check

Display Check Navigation Check

Bluetooth TEL Check

E120070E01

HINT:

Each item is grayed out or not displayed based on the device settings. (c) Unit Check Mode Screen

E120071E03

Screen Description:

E120071E03

Display

Contents

Device name/*1

Target device

Segment/*2

Target device logical address

DTC/*3

DTC (Diagnostic Trouble Code)

Timestamp/*4

The time and date of past DTCs are displayed. (The year is displayed in 2-digit format.)

Present code/*5

DTCs output at the service check are displayed.

Past code/*6

Diagnostic memory results and recorded DTCs are displayed.

Diagnosis clear switch/*7

Pushing this switch for 3 seconds clears the diagnostic memory data of the target device. (Both response to diagnostic system check result and the displayed data are cleared.)

(d) LAN Monitor (Original) Screen

LAN Monitor

EMV

NoErr

CAMERA NCON

NÄVI

CHEK

MONET NRES

CD-CH1

CHEK

CD-CH2

MD-CH

NoErr

Check results of all the devices are displayed.

Result

Meaning

Action

No Err (OK)

There are no communication DTCs.

-

CHEK

The device responds with a "check"-type DTC.

Look up the DTC in "Unit Check Mode".

NCON

The device was previously present, but does not respond in diagnostic mode.

1. Check power supply wire harness of the device.

2. Check the AVC-LAN of the device.

Old

The device responds with an "old"-type DTC.

Look up the DTC in "Unit Check Mode".

NRES

The device responds in diagnostic mode, but gives no DTC information.

1. Check power supply wire harness of the device.

2. Check the AVC-LAN of the device.

(e) LAN Monitor (Individual) Screen

E120072E01

Screen Description:

E120072E01

Display

Contents

Device name/*1

Target device

Segment/*2

Target logical address

DTC/*3

DTC (Diagnostic Trouble Code)

Sub-code (device address)/*4

Physical address stored with DTC (If there is no address, nothing is displayed.)

Connection check No./*5

Connection check number stored with DTC

DTC occurrence/*6

Number of times the same DTC has been recorded

Diagnosis clear switch/*7

Pushing this switch for 3 seconds clears the diagnostic memory data of the target device. (Both response to diagnostic system check result and the displayed data are cleared.)

2. DISPLAY CHECK

(a) Vehicle Signal Check Mode Screen

Vehicle Signal Check Mode

Battery 13.6V

SPEED 49km/h

IG ON

TAIL ON

PKB OFF

REV OFF

Name

Contents

Battery

Battery voltage is displayed.

PKB

Parking brake ON/OFF state is displayed.

REV

Reverse signal ON/OFF state is displayed.

IG

IG switch ON/OFF state is displayed.

TAIL

TAIL signal (Light control switch) ON/OFF state is displayed.

SPEED

Vehicle speed is displayed in km/h.

HINT:

• Only items sending a vehicle signal will be displayed.

• This screen is updated once per second when input signals to the vehicle are changed.

(b) CAN Connection Check Screen

Prius 2004 Upgrade Emv
*1

E120075E01

Screen Description:

E120075E01

Name

Contents

CAN connection check result/*1

• For systems connected to the CAN system, the results of the CAN connection check are displayed.

• "NG" - The ignition switch is on (ACC or IG) and the CAN communication lines are malfunctioning or the CAN bus lines are not connected.

• "OK" - The ignition switch is on (ACC or IG) and the CAN communication lines are normal.

• Blank - CAN connection check is performed with the ignition switch on (ACC) or off.

HINT:

• This function operates only for the systems connected to the CAN system.

• When the ignition switch is turned off, the bus lines are disconnected, or a malfunction occurs in the bus lines while the CAN connection check result is being displayed, the problem will be reflected on the screen in real time.

3. NAVIGATION CHECK

(a) Navigation Check Screen

Navigation Check

Menu

GPS Information

Parts Information

Vehicle Sensors

Mic&Voice Recognition Check

Color Bar Check

Memory Copy/Paste

DVD Player Information

HINT:

Each item is grayed out or not displayed based on the device settings. (b) GPS Information Screen

GPS Information

Nävi Menu

No.

Elv

Azm

LVL

STS

No.

Elv

Azm

LVL

STS

N 3

73°

/021

121

¡Pi

1 5

80°

/279°

541

¡Pi

! 8

52°

/183°

581

Pi

! 9

27°

/121"

26 j-

i/j

110

32"

/219"

391

IP j

113

19°

/330°

111

1—

'16

49°

/097°

20 ;

¡T 1

"18

22°

/300"

12"

¡20

61°

/045°

39 j

|T J

¡21

40°

/142°

491

|t|

■ 23

72°

/278°

571

Lp_!

■24

17°

/350"

131

bu

¡Measurement j\Daje_(GMJ)_MM/DD/YYYY OM&OOj-■status: 3D i '^."ätTtücle "CoïïgTtiTdë ~i I-------" 1 _3£'59JL 137100JZ_

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment