Display does not Dim when Light Control Switch is Turned ON

INSPECTION PROCEDURE

CHECK IMAGE QUALITY SETTING

*

D Display

TÎ50S. 1 ------- --1

V^^^JB^RNAN^-

p

E125813E01

(a) Enter the display adjustment screen by pressing the "DISP" switch.

(b) Turn the light control switch to the TAIL position.

(c) Check if "DAY MODE" on the display adjustment is ON. OK:

"DAY MODE" is ON.

Go to step 2

TURN "DAY MODE" SETTING OFF

CHECK VEHICLE SIGNAL (DISPLAY CHECK MODE)

Vehicle Signal Check Mode

Battery 13.6V

SPEED 49km/h

IG ON

TAIL ON

PKB OFF

REV OFF

(a) Enter the "Display Check" mode (Vehicle Signal Check) (See page NS-22).

(b) Check that the display changes between ON and OFF according to the light control switch operation.

Light Control Switch

Display

TAIL or ON

ON

OFF

The display is updated once per second. It is normal for the display to lag behind the actual switch operation.

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE

REPLACE RADIO AND NAVIGATION ASSEMBLY

Simple Car Care Tips and Advice

Simple Car Care Tips and Advice

Put an End to All Your Car Troubles. Does Your Car Break Down Often? Are You Spending More On Fuel Than You Thought You Would? Is Maintaining Your Car Eating Into Your Budget? Make Your Car Last Longer with Some Simple Do It Yourself Tips.

Get My Free Ebook


Post a comment