GPS Antenna Power Source Error
Total OBD & ECU Auto Diagnostics
DESCRIPTION
|
DTC No. |
DTC Detection Condition |
|
58-40 |
GPS antenna error |
|
58-41 |
Error of the power source to the GPS antenna |
|
80-40 |
GPS antenna error |
|
80-41 |
Error of the power source to the GPS antenna |
Wire harness GPS antenna
Radio and navigation assembly
Trouble Area
Wire harness GPS antenna
Radio and navigation assembly
HINT:
After the inspection is completed, clear the DTCs.
CHECK HARNESS AND CONNECTOR (GPS ANTENNA - RADIO AND NAVIGATION ASSEMBLY)
(a) Check that the GPS antenna cord is securely connected to the radio and navigation assembly connector. OK:
The cord is securely connected.
REPAIR OR REPLACE HARNESS OR CONNECTOR
REPLACE GPS ANTENNA
(a) Replace the GPS antenna with a normal one and check if the same problem occurs again.
(2) Recheck for DTCs and check if the same trouble occurs again.
Same problem does not occur.
REPLACE RADIO AND NAVIGATION ASSEMBLY
58-42
Was this article helpful?
Do It Yourself Car Diagnosis
Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.
Post a comment