Inspection Procedure

CHECK CELLULAR PHONE

(a) Check if the voice on the other side can be heard using a cellular phone. OK:

Voice can be heard.

REPAIR OR REPLACE CELLULAR PHONE

CHECK NAVIGATION SYSTEM

(a) Check that navigation sound can be heard from the driver side speaker. OK:

Audio sound can be heard.

GO TO "VOICE GUIDANCE DOES NOT FUNCTION" IN PROBLEM SYMPTOMS TABLE

CHECK SETTINGS

j] Call BTlÜlHmT.ll

Georga Washington_( Mute )

1234567890_

(Transfer^ Call J

(a) Check if the volume level is set to low on the CALL screen. OK:

The level is not set low.

SET VOLUME TO HIGH

CHECK SETTINGS

Handsfree Voice Quality Set

Receive Voice Level

Send VoiceLevel

Voice I 0 0

Quality Type Look at the service manual.

(a) Enter the "Handsfree Voice Quality Set" mode (See page NS-25).

(b) Check if the Receive Voice Level is set to "0". HINT:

The Receive Voice Level can be set to 11 different levels, -5 to +5, with a 3 dB difference.

(c) Check if the Receive Voice Level is set to the minimum or maximum level.

HINT:

When the Receive Voice Level is set to the minimum or maximum level, the sound may be distorted.

The Receive Voice Level is set to "0".

SET RECEIVE VOICE LEVEL TO "0"

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment