Inspection Procedure

Total OBD & ECU Auto Diagnostics

TOAD Auto Diagnostics

Get Instant Access

READ VALUE OF INTELLIGENT TESTER

(a) Connect the intelligent tester to the DLC3.

(b) Turn the ignition switch on (IG) and turn the intelligent tester main switch on.

(c) Select the items below in the DATA LIST, and read the display on the intelligent tester.

MAIN BODY (MAIN BODY ECU):

Item

Measurement Item / Display (Range)

Normal Condition

Diagnostic Note

D LOCK POS SW

Driver side door lock position switch signal / ON or OFF

ON: Driver side door is unlocked OFF: Driver side door is locked

-

P LOCK POS SW

Passenger side door lock position switch signal / ON or OFF

ON: Passenger side door is unlocked

OFF: Passenger side door is locked

-

RR LOCKPOS SW (with Smart Key System)

Rear right door lock position switch signal / ON or OFF

ON: Rear right door is unlocked OFF: Rear right door is locked

-

RL LOCKPOS SW (with Smart Key System)

Rear left door lock position switch signal / ON or OFF

ON: Rear left door is unlocked OFF: Rear left door is locked

-

Normal conditions listed above are displayed. NG>

GO TO POWER DOOR LOCK CONTROL SYSTEM

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE

Was this article helpful?

0 0
Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment