Installation

1. INSTALL COMBINATION METER ASSEMBLY

(a) Connect the 2 connectors as shown in the illustration.

(b) Secure the wire harness to the combination meter assembly.

(c) Install the combination meter assembly as shown in the illustration.

(d) Install the 4 screws.

2. INSTALL INSTRUMENT CLUSTER FINISH PANEL

(a) Engage the 4 claws and the guide.

(b) Install the instrument cluster finish panel with the 2 clips.

3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (w/o Smart Key System) (See page IP-57)

4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (w/ Smart Key System) (See page IP-57)

5. INSTALL NO. 1 INSTRUMENT PANEL SUBASSEMBLY (See page IP-57)

6. INSTALL STEERING COLUMN COVER

(a) Engage the claw and install the upper steering column cover.

(c) Install the lower steering column cover with the 2 screws.

7. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH

(a) Install the air hose and connect the connector.

(b) Engage the claw and the 9 clips.

(c) Connect the hood lock control cable assembly.

(d) Install the lower instrument panel finish panel LH with the screw and bolt.

8. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH (See page IR-54)

9. INSTALL FRONT DOOR SCUFF PLATE LH (See page IR-54)

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment