Ip

4. CONNECT INSTRUMENT PANEL WIRE ASSEMBLY (See page RS-398)

5. INSTALL NO. 1 DEFROSTER NOZZLE GARNISH

(a) Connect each connector.

(b) Engage the 4 guides.

(c) Engage the 8 clips and install the No. 1 defroster nozzle garnish.

6. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for LH Side) (See page AV-156)

7. INSTALL INSTRUMENT PANEL NO. 1 SPEAKER PANEL SUB-ASSEMBLY

(a) Engage the 2 guides.

(b) Engage the 6 claws and the 2 clips to install the instrument panel No. 1 speaker panel sub-assembly.

8. INSTALL INSTRUMENT PANEL NO. 1 REGISTER ASSEMBLY

(a) Engage the 4 clips and install the instrument panel No. 1 register assembly.

9. INSTALL FRONT PILLAR GARNISH LH (See page IR-51)

10. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for RH Side)

HINT:

Use the same procedures for the RH side and the LH side (See page AV-156).

B134010E01

B134010E01

11. INSTALL INSTRUMENT PANEL NO. 2 SPEAKER PANEL SUB-ASSEMBLY

(a) Engage the 2 guides.

(b) Engage the 6 claws and the 2 clips to install the instrument panel No. 2 speaker panel subassembly.

12. INSTALL INSTRUMENT PANEL NO. 3 REGISTER ASSEMBLY

(a) Engage the 4 clips and install the instrument panel No. 3 register assembly.

13. INSTALL FRONT PILLAR GARNISH RH (See page IR-52)

14. INSTALL NO. 1 CONSOLE BOX INSERT FRONT (for TMC Made)

(a) Engage the clip.

(b) Install the No. 1 console box insert front with the 3 screws <F>.

15. INSTALL NO. 1 CONSOLE BOX INSERT FRONT (for TMMK Made)

(a) Engage the clip.

(b) Install the No. 1 console box insert front with the 3 screws <O>.

16. INSTALL NO. 2 CONSOLE BOX INSERT FRONT (for TMC Made)

(a) Engage the clip.

(b) Install the No. 2 console box insert front with the 3 screws <F>.

17. INSTALL NO. 2 CONSOLE BOX INSERT FRONT (for TMMK Made)

(a) Engage the clip.

(b) Install the No. 2 console box insert front with the 3 screws <O>.

18. INSTALL CONSOLE BOX ASSEMBLY (for TMC Made)

(b) Install the console box assembly with the 2 bolts <G>.

19. INSTALL CONSOLE BOX ASSEMBLY (for TMMK Made)

(b) Install the console box assembly with the 2 bolts

20. INSTALL CONSOLE BOX CARPET

(a) Install the console box carpet.

21. INSTALL CONSOLE BOX POCKET

(a) Install the console box pocket.

22. INSTALL RADIO RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY (w/o Navigation System) (See page AV-147)

23. INSTALL NAVIGATION RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY (w/ Navigation System) (See page NS-196)

24. INSTALL INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY

(a) Engage the 7 clips and install the instrument panel No. 2 register assembly.

25. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for TMC Made)

(a) Connect each connector.

(c) Install the upper console panel sub-assembly with the 2 screws <F>.

26. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (for TMMK Made)

(a) Connect each connector.

(c) Install the upper console panel sub-assembly with the 2 screws <O>.

ci^Ciamp

B133996E01

27. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Automatic Transaxle)

(a) Connect the connector and engage the clamp.

(b) Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.

B133996E01

28. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY (for Manual Transaxle)

(a) Engage the 3 claws and 5 clips to install the upper console rear panel sub-assembly.

29. INSTALL FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY (for Automatic Transaxle)

(a) with Seat Heater System: (1) Connect each connector.

(b) Engage the 6 claws and the 3 clips to install the floor shift position indicator housing sub-assembly.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment