Ip

DISASSEMBLY

1. REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT (for TMC Made)

(a) Remove the screw <F> and the side No. 1 defroster nozzle duct.

2. REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT (for TMMK Made)

(a) Remove the screw <O> and the side No. 1 defroster nozzle duct.

3. REMOVE SIDE NO. 2 DEFROSTER NOZZLE DUCT (for TMC Made)

(a) Remove the screw <F> and the side No. 2 defroster nozzle duct.

4. REMOVE SIDE NO. 2 DEFROSTER NOZZLE DUCT (for TMMK Made)

(a) Remove the screw <O> and the side No. 2 defroster nozzle duct.

5. REMOVE DEFROSTER NOZZLE ASSEMBLY (for TMC Made)

(a) Remove the 3 screws <F> and the defroster nozzle assembly.

6. REMOVE DEFROSTER NOZZLE ASSEMBLY (for TMMK Made)

(a) Remove the 3 screws <O> and the defroster nozzle assembly.

7. REMOVE NO. 1 HEATER TO REGISTER DUCT (for TMC Made)

(a) Remove the 3 screws <F> and the No. 1 heater to register duct.

8. REMOVE NO. 1 HEATER TO REGISTER DUCT (for TMMK Made)

(a) Remove the 3 screws <O> and the No. 1 heater to register duct.

9. REMOVE NO. 3 HEATER TO REGISTER DUCT (for TMC Made)

(a) Remove the 3 screws <F> and the No. 3 heater to register duct.

10. REMOVE NO. 3 HEATER TO REGISTER DUCT (for TMMK Made)

(a) Remove the 3 screws <O> and the No. 3 heater to register duct.

11. REMOVE NO. 2 HEATER TO REGISTER DUCT (for TMC Made)

(a) Remove the 2 screws <F> and the No. 2 heater to register duct.

12. REMOVE NO. 2 HEATER TO REGISTER DUCT (for TMMK Made)

(a) Remove the 2 screws <O> and the No. 2 heater to register duct.

13. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY (See page AV-196)

14. REMOVE NAVIGATION ANTENNA ASSEMBLY (See page NS-214)

15. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY (See page RS-395)

16. REMOVE GLOVE BOX LIGHT ASSEMBLY

(a) Disengage the 2 claws and remove the glove box light assembly.

17. REMOVE PLASMACLUSTER (w/ Plasmacluster) (See page AC-276)

18. REMOVE NO. 1 INSTRUMENT PANEL PIN (for TMMK Made)

(a) Remove the 2 screws <X> and 2 No. 1 instrument panel pins.

REASSEMBLY

1. INSTALL NO. 1 INSTRUMENT PANEL PIN (for TMMK Made)

(a) Install the 2 No. 1 instrument panel pins with the 2 screws <X>.

2. INSTALL PLASMACLUSTER (w/ Plasmacluster) (See page AC-276)

3. INSTALL GLOVE BOX LIGHT ASSEMBLY

(a) Engage the 2 claws and install the glove box light.

4. INSTALL NAVIGATION ANTENNA ASSEMBLY (See page NS-214)

5. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY (See page AV-210)

6. INSTALL NO. 2 HEATER TO REGISTER DUCT (for TMC Made)

(a) Install the No. 2 heater to register duct with the 2 screws <F>.

7. INSTALL NO. 2 HEATER TO REGISTER DUCT (for TMMK Made)

(a) Install the No. 2 heater to register duct with the 2 screws <O>.

8. INSTALL NO. 3 HEATER TO REGISTER DUCT (for TMC Made)

(a) Install the No. 3 heater to register duct with the 3 screws <F>.

9. INSTALL NO. 3 HEATER TO REGISTER DUCT (for TMMK Made)

(a) Install the No. 3 heater to register duct with the 3 screws <O>.

10. INSTALL NO. 1 HEATER TO REGISTER DUCT (for TMC Made)

(a) Install the No. 1 heater to register duct with the 3 screws <F>.

11. INSTALL NO. 1 HEATER TO REGISTER DUCT (for TMMK Made)

(a) Install the No. 1 heater to register duct with the 3 screws <O>.

12. INSTALL DEFROSTER NOZZLE ASSEMBLY (for TMC Made)

(a) Install the defroster nozzle assembly with the 3 screws <F>.

13. INSTALL DEFROSTER NOZZLE ASSEMBLY (for TMMK Made)

(a) Install the defroster nozzle assembly with the 3 screws <O>.

14. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT (for TMC Made)

(a) Install the side No. 2 defroster nozzle duct with the screw <F>.

15. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT (for TMMK Made)

(a) Install the side No. 2 defroster nozzle duct with the screw <O>.

16. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT (for TMC Made)

(a) Install the side No. 1 defroster nozzle duct with the screw <F>.

17. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT (for TMMK Made)

(a) Install the side No. 1 defroster nozzle duct with the screw <O>.

INSTALLATION

INSTALL NO. 3 INSTRUMENT PANEL STAY

(a) Engage the claw and install the 5 No. 3 instrument panel stays.

INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY (for TMC Made)

(a) Engage the 5 claws. NOTICE:

Do not allow the wire harness to get caught in the claws.

INSTRUMENT PANEL - INSTRUMENT PANEL SAFETY PAD IP-45

(b) Install the 2 bolts <C> or <H> and 2 nuts <I> or <Z>.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment