Ir

Reference: Tape Attachment Locations Double-sided Tape

NOTICE:

Securely apply the double-sided tape to prevent it from being out of alignment and peeling off.

(b) Peel off the release paper from the double-sided tape.

(c) Attach the No. 1 roof wire along the double-sided tape so that the marking surface of the wire harness faces downward.

NOTICE:

• Securely attach the No. 1 roof wire.

• Failure to do so may cause abnormal noise.

(d) Turn the visor connectors clockwise approximately 90° to install the connectors to the roof headlining.

(e) Apply adhesive tape to locations shown in the illustration.

Reference: Tape Attachment Locations for TMC made:

for TMMK made:

Reference: Tape Attachment Locations for TMC made:

for TMMK made:

HINT:

As shown at point A in the illustration, line up and secure the reference tape of the wire harness to the tip of the roof headlining assembly.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment