Ir

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for Manual Seat)

CAUTION:

Wait for 90 seconds after disconnecting the cable to prevent airbag deployment (See page RS-1).

2. REMOVE FRONT SEAT HEADREST ASSEMBLY (for Manual Seat)

3. REMOVE SEAT TRACK COVER LH (for Manual Seat) (See page SE-16)

4. REMOVE INNER SEAT TRACK BRACKET COVER LH (for Manual Seat) (See page SE-16)

5. REMOVE FRONT SEAT ASSEMBLY LH (for Manual Seat) (See page SE-16)

6. REMOVE FRONT SEAT HEADREST ASSEMBLY (for Power Seat)

7. REMOVE SEAT TRACK COVER LH (for Power Seat) (See page SE-30)

8. REMOVE INNER SEAT TRACK BRACKET COVER RH (for Power Seat) (See page SE-30)

9. REMOVE FRONT SEAT ASSEMBLY LH (for Power Seat) (See page SE-30)

10. REMOVE FRONT SEAT HEADREST ASSEMBLY (for Manual Seat)

11. REMOVE SEAT TRACK COVER RH (for Manual Seat)

HINT:

Use the same procedures for the RH side and the LH side.

12. REMOVE INNER SEAT TRACK BRACKET COVER RH (for Manual Seat)

HINT:

Use the same procedures for the RH side and the LH side.

13. REMOVE FRONT SEAT ASSEMBLY RH (for Manual Seat)

HINT:

Use the same procedures for the RH side and the LH side.

14. REMOVE FRONT SEAT HEADREST ASSEMBLY (for Power Seat)

15. REMOVE SEAT TRACK COVER RH (for Power Seat)

HINT:

Use the same procedures for the RH side and the LH side.

16. REMOVE INNER SEAT TRACK BRACKET COVER LH (for Power Seat)

HINT:

Use the same procedures for the RH side and the LH side.

17. REMOVE FRONT SEAT ASSEMBLY RH (for Power Seat)

HINT:

Use the same procedures for the RH side and the LH side.

18. REMOVE REAR SEAT CUSHION ASSEMBLY (See page SE-77)

19. REMOVE REAR SEAT HEADREST ASSEMBLY

20. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY

21. REMOVE REAR SEAT BACK ASSEMBLY (for Fixed Seat Type) (See page SE-77)

22. REMOVE SEPARATE TYPE REAR SEAT BACK ASSEMBLY LH (for Fold Down Seat Type) (See page SE-47)

23. REMOVE SEPARATE TYPE REAR SEAT BACK ASSEMBLY RH (for Fold Down Seat Type) (See page SE-47)

24. REMOVE REAR SIDE SEAT BACK ASSEMBLY LH (for Fold Down Seat Type) (See page SE-48)

25. REMOVE REAR SIDE SEAT BACK ASSEMBLY RH (for Fold Down Seat Type) (See page SE-48)

26. REMOVE REAR SEAT BACK COVER (for Reclining Seat Type) (See page SE-63)

27. REMOVE SEPARATE TYPE REAR SEAT BACK ASSEMBLY LH (for Reclining Seat Type) (See page SE-63)

28. REMOVE SEPARATE TYPE REAR SEAT BACK ASSEMBLY RH (for Reclining Seat Type) (See page SE-64)

29. REMOVE CENTER SEAT BACK ASSEMBLY (for Reclining Seat Type) (See page SE-64)

30. REMOVE REAR DOOR SCUFF PLATE LH

(a) Disengage the 5 claws and 2 clips, and remove the rear door scuff plate LH.

31. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

32. REMOVE REAR DOOR SCUFF PLATE RH

HINT:

Use the same procedures for the RH side and the LH side.

33. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

34. REMOVE RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY LH (for Reclining Seat Type) (See page SE-68)

35. REMOVE RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY RH (for Reclining Seat Type)

HINT:

Use the same procedures for the RH side and the LH side.

36. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG LH (See page ED-38)

37. REMOVE DOOR ASSIST GRIP COVER LH (See page ED-38)

38. REMOVE REAR DOOR TRIM BOARD SUBASSEMBLY LH (See page ED-39)

39. REMOVE REAR DOOR INNER GLASS WEATHERSTRIP LH (See page ED-40)

40. REMOVE FRONT DOOR SCUFF PLATE LH

(a) Disengage the 7 claws and 3 clips, and remove the front door scuff plate LH.

41. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH

(a) Remove the cowl side trim clip.

(b) Disengage the 2 clips and remove the cowl side trim sub-assembly LH.

42. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH

43. REMOVE LAP BELT OUTER ANCHOR COVER (for LH Side)

(a) Disengage the 3 claws and remove the lap belt outer anchor cover.

44. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH

(a) Remove the bolt and disconnect the floor end of the front seat outer belt assembly.

Seat Pillar Protector For Camry

45. REMOVE LOWER CENTER PILLAR GARNISH LH

(a) Disengage the 2 claws and 2 clips, and remove the lower center pillar garnish LH.

46. REMOVE UPPER CENTER PILLAR GARNISH LH

(a) Remove the bolt.

(b) Disengage the clip and remove the upper center pillar garnish LH.

47. REMOVE FRONT DOOR SCUFF PLATE RH

HINT:

Use the same procedures for the RH side and the LH side.

48. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

HINT:

Use the same procedures for the RH side and the LH side.

49. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH

50. REMOVE LAP BELT OUTER ANCHOR COVER (for RH Side)

HINT:

Use the same procedures for the RH side and the LH side.

51. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY RH

HINT:

Use the same procedures for the RH side and the LH side.

52. REMOVE LOWER CENTER PILLAR GARNISH RH

HINT:

Use the same procedures for the RH side and the LH side.

53. REMOVE UPPER CENTER PILLAR GARNISH RH

HINT:

Use the same procedures for the RH side and the LH side.

54. REMOVE ROOF SIDE INNER GARNISH LH

(a) Disengage the 5 clips and 2 claws, and remove the roof side inner garnish LH.

55. REMOVE ROOF SIDE INNER GARNISH RH

HINT:

Use the same procedures for the RH side and the LH side.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment