Removal

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait for 90 seconds after disconnecting the cable to prevent airbag deployment (See page RS-1).

2. REMOVE LOWER NO. 3 STEERING WHEEL COVER (See page RS-349)

3. REMOVE LOWER NO. 2 STEERING WHEEL COVER (See page RS-349)

4. REMOVE STEERING PAD (See page RS-350)

5. REMOVE STEERING PAD SWITCH LH (for 4 Spoke)

(a) Disconnect the pad switch connector from the spiral cable.

(b) Remove the screw.

(c) Disengage the 2 pins and remove the steering pad switch LH.

6. REMOVE STEERING PAD SWITCH ASSEMBLY (for 4 Spoke)

(a) Disconnect the pad switch connector from the spiral cable.

(b) Remove the screw.

(c) Disengage the 2 pins and remove the steering pad switch.

(d) Remove the screw.

(e) Disengage the 2 pins and remove the steering pad switch assembly.

Do It Yourself Car Diagnosis

Do It Yourself Car Diagnosis

Don't pay hundreds of dollars to find out what is wrong with your car. This book is dedicated to helping the do it yourself home and independent technician understand and use OBD-II technology to diagnose and repair their own vehicles.

Get My Free Ebook


Post a comment